FIRE PUMP,
THREE PHASE,
ODP ,
RIGID BASE,
EPACT MOTORS

Applications:

For use on pumps designed for fire pump duty and installed per NFPA-20.

These dripproof motors are intended for installation in relatively clean and dry environments.

Fire Pump motors are not recommended for use with variable frequency drives.

Features:

• UL file EX5190, CSA file LR2025 and CE mark
• 50° C ambient
• Ball bearings
• 1.15 service factor (except as noted)
• Red paint on 25 HP through 250 HP
• NEMA ® design B, code G or less
• Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
• Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
• Will accept C-Face kits (except as noted), see accessories section for kits
• 230/460 and 460 Volt models rated for 50 HZ at next lower HP
• 1.15 SF , as noted