170-206 (19) HVAC / Air Moving


Subcategory List
-
170-170 (19) Aeration Fan Farm -- Agricultural Duty -- Single Phase -- TEAO -- Rigid Base (15)
Applications:
Direct drive vane axial fans. These totally enclosed air over motors must be mounted
within the airstream for proper cooling.These aeration fan motors are often used in
agricultural applications.Features:
- Capacitor start design for high starting torque (as noted)
- 1.0 service factor except as noted
- UL recognized and CSA certified
- 18” Leads for ease of connections, Marathon ® models only
- 6Z & 143-5TZ have keyway and 1/4” x 20” UNC tapped hole, Marathon models only
Category Product
Part# Summary
Quick Reference -
170-170 (19) Aeration Fan Farm -- Agricultural Duty -- Three Phase -- TEAO -- Rigid Base (4)
Applications:
Direct drive vane axial fans.
These totally enclosed air over motors must be mounted within the airstream for proper cooling.
These aeration fan motors are often used in agricultural applications.
Features:
- Capacitor start design for high starting torque (as noted)
- 1.0 service factor except as noted
- UL recognized and CSA certified
- 18” Leads for ease of connections, Marathon ® models only
- 56Z & 143-5TZ have keyway and 1/4” x 20” UNC tapped hole, Marathon models only
Category Product
Part# Summary
Quick Reference -
171-171 (19) Attic Fan -- Split Phase -- Open Air Over -- (Resilient Base) (3)
Features:
- Variable torque on two speed motors
- 48Y frame has 48/56 frame mounting holes
- 56YZ frame with 3” shaft height, 1/2” diameter shaft, and 5/8” adapter with keyway included
- UL recognized and CSA certified
- Auto overload
Category Product
Part# Summary
Quick Reference -
171-171 (19) Centrifugal Fan -- Single Phase -- Dripproof -- (Rigid Base) (4)
Applications:
Direct drive centrifugal fans installed in relatively clean and dry applications
Features:
- Capacitor start/capacitor run design for high starting torque and low amps
- Ball bearings, mechanically locked on shaft end
- Heavy gauge steel frame and base
- 1.15 service factor (unless otherwise noted)
- UL recognized and CSA certified
- Thermostats for thermal overload protection
- 84” leads, rodent screens
- Shaft 1” longer than NEMA ® standard for extra clearance
Category Product
Part# Summary
Quick Reference -
172-172 (19) Condenser Fan -- Heat Pump -- PSC -- Open Air Over -- Thru-Bolt -- Shaft Up or HorIzontal (35)
Applications:
Direct drive condenser fans mounted vertically, shaft up.
Models with open brackets should be mounted where they are shielded from rain.
These motors need to be
mounted within the airflow of the fan for proper cooling.Features:
- Frame and shaft end bracket enclosed, except X011, X012, and X208 have open frames and X426 has open frame and brackets
- Single and multi-speed models as noted
- Ball bearings
- Weather resistant reversing plug
- 30” long leads
- Shaft with flat, unless otherwise noted
- 60ºC ambient (as noted)
- Shaft slinger
- 1-5/8” extended thru-bolts on shaft end, except where noted
- Automatic reset thermal protector
- Lug mount kits and other accessories available, see accessories section
- UL recognized and CSA certified
- Capacitor not included, see accessories section
Category Product
Part# Summary
Quick Reference -
173-173 (19) Condenser Fan -- Heat Pump -- PSC -- Open Air Over -- Rigid Base -- Shaft Up or HorIzontal (2)
Applications:
Condenser fans, installed outdoors. These motors need to be mounted within the airflow of the fan for proper cooling.
Features:
- Frame and shaft end bracket enclosed
- Heavy gauge steel constructions
- 56Y frame has non-NEMA ® BA dimension of 1.97”
- Automatic reset thermal protector
- Flat and keyway on shaft
- Ball bearings
- UL recognized and CSA certified
- Capacitor included on X432, see accessories section to order capacitor for X433
Category Product
Part# Summary
Quick Reference -
173-173 (19) Condenser Fan -- Heat Pump -- PSC -- Open Air Over -- Thru-Bolt -- Shaft Down (11)
Applications:
Direct drive condenser fans mounted vertically, shaft down. These motors need to be
mounted within the airflow of the fan for proper cooling.Features:
- Frame and opposite shaft end bracket are enclosed for vertical shaft down mounting
- Weather resistant reversing plug
- 30” long leads
- Shaft slinger
- 1-1/4” Extended thru-bolts on shaft end, except where noted
- Automatic reset thermal protector
- Ball bearings
- UL recognized and CSA certified
- Capacitor not included, see accessories section
Category Product
Part# Summary
Quick Reference -
174-174 (19) Commercial Condenser Fan -- Heat Pump -- PSC -- Resilient Base -- Shaft Up or HorIzontal (1)
Applications:
Condenser fans, installed outdoors. These motors need to be mounted within the airflow of the fan for proper cooling.
Features:
- Frame and shaft end bracket enclosed
- Automatic reset thermal protector
- UL recognized and CSA certified
- Ball bearings
- Capacitor included
Category Product
Part# Summary
Quick Reference -
174-174 (19) Condenser Fan -- Heat Pump -- PSC -- Air Over -- 48 Frame -- Thru-Bolt -- All Angle (38)
Applications:
Direct drive condenser fans for all angle mounting. These motors need to be mounted within the airflow of the fan for proper cooling.
Features:
- Frame and end brackets enclosed
- Single and multi-speed models, as noted
- Ball bearings (except as noted)
- Weather resistant reversing plug
- 30” long leads
- Shaft slinger
- 1-1/2” Thru-bolts on shaft end, 1” thru-bolts on lead end (except as noted)
- Automatic reset thermal protector
- Weep holes with removable plugs on end brackets. Remove bottom plug after installation
- Lug mount kits and other accessories available (see accessories section)
- 60°C ambient, as noted
- UL recognized and CSA certified
- Capacitor not included, see accessories section
Category Product
Part# Summary
Quick Reference -
175-175 (19) Condenser Fan -- Heat Pump -- 56 Frame -- Resilient Ring -- Thru-Bolt -- PSC -- Dripproof (7)
Applications:
Direct drive condenser fans mounted vertically, shaft up, or horizontal. These motors need to be mounted within the airflow of the fan for proper cooling.
Features:
- Enclosed shaft end bracket with vented frame
- Ball bearings
- 30” long leads (except P243)
- Shaft slinger
- 60°C ambient, as noted
- Automatic reset thermal protector
- Flat & keyway on shaft
- UL recognized and CSA certified
- Capacitor not included, see accessories section
Category Product
Part# Summary
Quick Reference -
175-175 (19) Condenser Fan -- Heat Pump -- 56 Frame -- Resilient Ring -- Thru-Bolt -- PSC -- Open Air Over -- Shaft Up (3)
Applications:
Direct drive condenser fans mounted vertically, shaft up, or horizontal. These motors need to be mounted within the airflow of the fan for proper cooling.
Features:
- Enclosed shaft end bracket with vented frame
- Ball bearings
- 30” long leads (except P243)
- Shaft slinger
- 60°C ambient, as noted
- Automatic reset thermal protector
- Flat & keyway on shaft
- UL recognized and CSA certified
- Capacitor not included,
see accessories section
Category Product
Part# Summary
Quick Reference -
175-175 (19) Condenser Fan -- Heat Pump -- 56 Frame -- Resilient Ring -- Thru-Bolt -- PSC -- Single Phase -- Resilient Base (4)
Features:
- Capacitor mounted (single phase)
- TEAO except:
- H768 & C663 are ODP
- C662 is OAO
- 60°C ambient, as noted
- Automatic reset thermal protector
- Ball bearings
- Flat & keyway on shaft
- except for:
- H964 shaft is keyed only
- C662 and C663 shafts are flat only
Category Product
Part# Summary
Quick Reference -
175-175 (19) Condenser Fan -- Heat Pump -- 56 Frame -- Three Phase -- Rigid Base (3)
Features:
- TEAO except:
- H768 & C663 are ODP
- 60°C ambient, as noted
- Automatic reset thermal protector
- Ball bearings
Category Product
Part# Summary
Quick Reference - TEAO except:
-
176-176 (19) Commercial Condenser Fan -- Heat Pump -- PSC Motors Resilient Ring -- Shaft Up Motors Resilient Ring -- Shaft Up Motors -- Open Air Over (10)
Applications:
Condenser fans, installed outdoors. These motors need to be mounted within the airflow of the fan for proper cooling.
Features:
- Double sealed ball bearing
- Automatic reset thermal protector
- Quick-connect design
- 1” (minimum) extended thru bolts
- Resilient mounting rings supplied (except for C770, C081, C771)
- Capacitor not included
- 1.0 service factor
- 60° C ambient (except C490, C785, C786 are 40° C)
- 5/8” Dia. shaft with both keyway and flat
Category Product
Part# Summary
Quick Reference -
176-176 (19) Commercial Condenser Fan -- Heat Pump -- PSC Motors Resilient Ring -- Shaft Up Motors Resilient Ring -- Shaft Up Motors -- TEAO (2)
Applications:
Condenser fans, installed outdoors. These motors need to be mounted within the airflow of the fan for proper cooling.
Features:
- Double sealed ball bearing
- Automatic reset thermal protector
- Quick-connect design
- 1” (minimum) extended thru bolts
- Resilient mounting rings supplied (except for C770, C081, C771)
- Capacitor not included
- 1.0 service factor
- 60° C ambient (except C490, C785, C786 are 40° C)
- 5/8” Dia. shaft with both keyway and flat
Category Product
Part# Summary
Quick Reference -
177-177 (19) Commercial Condenser Fan -- Heat Pump -- PSC Motors -- Open Air Over -- Belly Band -- Shaft Up (13)
Applications:
Heavy duty design for commercial direct drive condenser fans mounted vertically, shaft up. These motors need to be mounted within the airflow of the fan for proper cooling.
Features:
- Unique rain shield fits over shaft to protect motor in vertical shaft up position
- Shaft with flat, unless otherwise noted
- Automatic reset thermal protector
- UL recognized and CSA certified
- Capacitor not included, see accessories section
- 60°C ambient, as noted
- Shaft slinger
- Ball bearings
Category Product
Part# Summary
Quick Reference -
178 -178 (19) Commercial Condenser Fan -- Heat Pump -- Three Phase -- Open Air Over -- Rigid Base -- Shaft Up or HorIzontal (13)
Applications:
Commercial condenser fans may be installed outdoors. These motors need to be mounted within the airflow of the fan for proper cooling.
Features:
- 70°C ambient (except as noted)
- Enclosed shaft end bracket, vented frame
- Continuous duty, air over
- Automatic reset thermal protector
- Shaft slinger
- Threaded lead exit
- Nameplated 60/50 hertz 190/380 volts, at next lower HP
- Double sealed ball bearings
- Flat and keyway on shaft
- Patented VCD™ – Voltage Change Device (as noted)
- Ball bearings
- UL recognized and CSA certified
Category Product
Part# Summary
Quick Reference -
179-179 (19) Condenser Fan -- Heat Pump -- Three Phase -- Open Air Over -- Belly Band -- Resilient Ring (27)
CONDENSER FAN–HEAT PUMP- THREE PHASE MOTORS OPEN AIR OVER- BELLY BAND–RESILIENT RING MOTORS
Category Product
Part# Summary
Quick Reference -
179-179 (19) Condenser Fan -- Heat Pump -- Three Phase -- Open Air Over -- Belly Band -- Resilient Ring -- Shaft Up With Fan Canopy -- Rainshield (5)
Category Product
Part# Summary
Quick Reference -
180-180 (19) Condenser Fan -- Continuous Duty -- Air Over -- Three Phase -- 56 Frame -- ODP -Baseless (2)
Hydraulic Adaptor
Category Product
Part# Summary
Quick Reference -
180-180 (19) Condenser Fan -- Continuous Duty -- Air Over -- Three Phase -- 56 Frame -- Open Air Over -- Baseless (8)
Applications:
Commercial condenser fans may be installed outdoors. These motors need to be mounted within the airflow of the fan for proper cooling.
Features:
- 70°C ambient (except as noted)
- Quick-Connect design
- Automatic reset thermal protector
- Reversible
- Double sealed ball bearings
- 1.0 service factor, except as noted
Category Product
Part# Summary
Quick Reference -
180-180 (19) Condenser Fan -- Continuous Duty -- Air Over -- Three Phase -- 56 Frame -- Open Air Over -- With Base (12)
Applications:
Commercial condenser fans may be installed outdoors. These motors need to be mounted within the airflow of the fan for proper cooling.
Features:
- 70°C ambient (except as noted)
- Quick-Connect design
- Automatic reset thermal protector
- Reversible
- Double sealed ball bearings
- 1.0 service factor, except as noted
Category Product
Part# Summary
Quick Reference -
180-180 (19) Condenser Fan -- Continuous Duty -- Air Over -- Three Phase -- 56 Frame -- TEAO -- Baseless (6)
Applications:
Commercial condenser fans may be installed outdoors. These motors need to be mounted within the airflow of the fan for proper cooling.
Features:
- 70°C ambient (except as noted)
- Quick-Connect design
- Automatic reset thermal protector
- Reversible
- Double sealed ball bearings
- 1.0 service factor, except as noted
Category Product
Part# Summary
Quick Reference -
181-181 (19) Evaporative Cooler -- Single Phase -- Dripproof -- Single and Two Speed -- Split Phase (15)
Applications:
Belt driven evaporative coolers.
Readily acknowledged as a leading motor option for residential and commercial evaporative cooler applications, Century ® motors offer moisture resistant features including plated hardware and switch parts, fungus treatment and double dip varnish treatment. These features provide the best buy for the customer.Features:
- Brass current carrying
- Single and two speed
- ODP (except as noted)
- Continuous filtration of oil
- Electro-zinc encapsulating varnish
- Reversible rotation (as noted)
- Heavy magnet wire insulation
- Moisture resistant terminal board
- Base not included (except as noted)
- Base 805C678H16 and clamps 165A674A01 available to order, will fit models with a “C” Dim. of 9.44 or 9.45
- Electro zinc plated governor parts, dust caps and terminal board cover
- Auto protector
Category Product
Part# Summary
Quick Reference -
181-182 (19) Evaporative Cooler -- Single Phase -- Dripproof -- Single and Two-Speed -- Capacitor Start (7)
Applications:
Belt driven evaporative coolers.
Readily acknowledged as a leading motor option for residential and commercial evaporative cooler applications, Century ® motors offer moisture resistant features including plated hardware and switch parts, fungus treatment and double dip varnish treatment. These features provide the best buy for the customer.Features:
- Brass current carrying
- Single and two speed
- ODP (except as noted)
- Continuous filtration of oil
- Electro-zinc encapsulating varnish
- Reversible rotation (as noted)
- Heavy magnet wire insulation
- Moisture resistant terminal board
- Base not included (except as noted)
- Base 805C678H16 and clamps 165A674A01 available to order, will fit models with a “C” Dim. of 9.44 or 9.45
- Electro zinc plated governor parts, dust caps and terminal board cover
- Auto protector
Category Product
Part# Summary
Quick Reference -
182-182 (19) Fan and Blower -- Direct Drive -- PSC -- Open Air Over -- Resilient Ring -- Thru-Bolt Mount (38)
Features:
- Open frames and brackets (except X011 and X012) have enclosed shaft end bracket
- Single and multi-speed models as noted
- Grommeted lead exit
- Weather resistant reversing plug
- 2-1/4” resilient ring mounting except where noted (base not included, see accessories section)
- 2 1/2” adapter rings supplied, shipped loose in box
- Extended thru-bolts on shaft end
- 30” long leads
- Automatic reset thermal protector
- Ball bearings
- UL recognized and CSA certified
- Capacitor not included, see accessories section
Category Product
Part# Summary
Quick Reference -
183-183 (19) Fan and Blower -- Direct Drive -- PSC -- Open Air Over -- Extended Thru-Bolt -- 460 Volt (4)
Applications:
Residential and commercial furnaces, air conditioners, exhaust fans, and other air handling equipment installed in clean and dry environments.
Features:
- Open frames and brackets
- Three lug mount fits 9” or 10” bolt circle. Mounting holes on lugs are .435” dia., with gromets and sleeves for .26” dia. option.
- Multi-speed capacity
- Weather resistant reversing plug
- 30” long leads
- Automatic reset thermal protector
- Ball bearings
- UL recognized and CSA certified
- Capacitor not included, see accessories section
Category Product
Part# Summary
Quick Reference -
183-183 (19) Fan and Blower -- Direct Drive -- PSC -- Open Air Over -- Extended Thru-Bolt -- 460 Volt -- Open Air Over -- Resilient Ring (7)
Applications:
Single speed PSC motors designed to replace PSC and shaded pole motors, used in
direct drive furnace, air conditioners, and others blowers.Features:
- Open frame and brackets
- Heavy gauge steel frame and base
- Shaft with flat
- 70°C ambient
- 37” leads
- Thermal overload protection
- 1/4” terminals on the capacitor leads
- 2 1/4” resilient rings, includes 2 1/2” expanders
- Capacitor not included, see accessories section
Category Product
Part# Summary
Quick Reference -
183-183 (19) Fan and Blower -- Direct Drive -- PSC -- Open Air Over -- Extended Thru-Bolt -- 460 Volt -- Open Air Over -- Torsion Flex Mount (6)
Category Product
Part# Summary
Quick Reference -
185-187 (19) Fan and Blower -- Split Phase -- Dripproof -- Resilient Base -- (Single and Two-Speed) (173)
Features:
- Ball bearings (except as noted)
- Service factor, as noted
- Thermal protection, as noted
- Variable torque on two speed motors
- Extended thru-bolts, as noted
- Heavy gauge steel frame and base
- 48Y and 48YZ frame have 48/56 frame mounting holes
- recognized and CSA certified
Category Product
Part# Summary
Quick Reference -
188-188 (19) Fan and Blower -- Split Phase -- Resilient Base -- (Single and Two-Speed) (44)
Hydraulic Adaptor
Category Product
Part# Summary
Quick Reference -
189-189 (19) Fan and Blower -- Split Phase -- (Rigid Base) (10)
Features:
- Ball bearings (except as noted)
- •Service factor, as noted
- Open construction (except as noted)
- Extended thru-bolts, as noted
- Continuous duty
Category Product
Part# Summary
Quick Reference -
189-189 (19) Fan and Blower -- Split Phase -- Dripproof -- (Single and Two-Speed) -- ( Resilient Base) (16)
Category Product
Part# Summary
Quick Reference -
192-192 (19) Fan and Blower -- Capacitor Start -- -Single and Two-Speed -- ( Resilient Base) (56)
Features:
- Open dripproof except as noted
- Service factor, as noted
- 40° C ambient
- Extended thru-bolts, as noted
- Capacitor start / capacitor run as noted
- Ball bearings (except as noted)
Category Product
Part# Summary
Quick Reference -
194-194 (19) Fan and Blower -- Split Phase -- Single and Two-Speed -- TEAO --TENV -- As Noted -- ( Resilient Base) (30)
Features:
- Ball bearings (except as noted)
- 1.0 service factor (except as noted)
- Extended thru-bolts, as noted
Category Product
Part# Summary
Quick Reference -
194-194 (19) Fan and Blower -- Split Phase -- Single and Two-Speed- TEFC -- ( Resilient Base) (3)
Features:
- Ball bearings (except as noted)
- 1.0 service factor (except as noted)
- Extended thru-bolts, as noted
Category Product
Part# Summary
Quick Reference -
195-195 (19) Fan and Blower -- Split Phase and Capacitor Start -- Totally Enclosed -- Single and Two-Speed -- ( Resilient Base) (42)
Features:
- Thermal protection, as noted
- 1.0 service factor (except as noted)
- Heavy gauge steel frame and base
- Split phase (except as noted)
- Ball bearings
- UL recognized and CSA certified
Category Product
Part# Summary
Quick Reference -
196-196 (19) Fan and Blower -- Three Phase -- Dripproof -- Single and Two-Speed -- (Resilient Base) (64)
Features:
- Single and two-speed models, as noted
- Variable torque on two speed ratings
- Ball bearings
- Heavy gauge steel frame and base
- Thermal protection, as noted
- Service factor, as noted
- Nameplated 60/50 Hz at next lower horsepower (except as noted)
- Patented VCD™, Voltage Change Device where footnoted “VC”
- UL recognized and CSA certified
Category Product
Part# Summary
Quick Reference -
197-197 (19) Fan and Blower -- Three Phase -- Dripproof -- Single and Two-Speed -- (Resilient Base) -- (Century) (33)
Category Product
Part# Summary
Quick Reference -
198-198 (19) Fan and Blower -- Quick-Fit -- (Adjustable Ring Mount) (3)
Features:
- Split phase
- Service factor, as noted
- Resilient ring mount
- Auto protection
- Open dripproof
- Ball bearings (except as noted)
Category Product
Part# Summary
Quick Reference -
198-198 (19) Fan and Blower -- Three Phase -- (Resilient Base) (5)
Features:
- Ball bearings (except as noted)
- 1.15 service factor
- TENV, except H1031L is TEAO
- 7/8” extended thru-bolts, shaft-end
- Continuous duty
Category Product
Part# Summary
Quick Reference -
198-198 (19) Furnace Blower-- Split Phase -- Open -- (PDQ Mounting) (3)
Applications:
Designed for replacement of virtually any NEMA ® 48 and 56 frame belt drive furnace blower motors. PDQ models have 1 1/2” extended splined hub on opposite shaft end for quick and easy positioning of resilient ring to properly fit the pre-existing motor base.
Features:
- Ball bearings
- Reversible rotation connected for CCW rotation from factory
- NEMA service factors
- 4733, 4734 and 4735 have both 48 and 56 frame mounting holes and including mounting base
- UL recognized and CSA certified
Category Product
Part# Summary
Quick Reference -
199-199 (19) Exhaust Ventilator -- Single Phase -- Dripproof -- Single Speed -- (C-Face Footless) (13)
Features:
- Split phase (except as noted)
- Thermal protection, as noted
- Service factor, as noted
- Century ® motors with 56CZ frames have 2-1/4 x 5/8 shaft dimensions
- Ball bearings
- Open dripproof except F396L is TENV
Category Product
Part# Summary
Quick Reference -
199-199 (19) Exhaust Ventilator -- Single Phase -- Dripproof -- Single Speed -- (C-Face Footless) -- Century (37)
Features:
- Split phase (except as noted)
- Thermal protection, as noted
- Service factor, as noted
- Century ® motors with 56CZ frames have 2-1/4 x 5/8 shaft dimensions
- Ball bearings
- Open dripproof except F396L is TENV
Category Product
Part# Summary
Quick Reference -
200-200 (19) Oil Burner -- Single Phase -- NEMA 48M -- Flange Mount (2)
Applications:
Replacement motors for mini pumps in residential or light commercial furnaces
Features:
- High efficiency design
- Ultra quiet performance
- 14” cord for easy connection
- UL recognized and CSA certified
Category Product
Part# Summary
Quick Reference -
200-200 (19) Oil Burner -- Split Phase and Capacitor Start -- NEMA 48M and 48N -- (Flange Mount) (23)
Applications:
Direct replacement motors for residential and commercial oil burners and hot water pressure/steam cleaners.
Features:
- Ball bearings (except as noted)
- 20” long leads from a 1/2” NPT opening
- Split phase and capacitor start designs
- Catalog numbers 4781, 4788, O010 and O011 have dripproof enclosures
- Semi- or totally enclosed steel frame (totally enclosed foot- noted with N)
- Two-bolt, NEMA ® N- or M- flange direct mounting
- 1.0 service factor
Category Product
Part# Summary
Quick Reference -
201-201 (19) Oil Burner -- Split Phase and Capacitor Start -- Dripproof -- NEMA -- 56C -- (C-Face Footless) (10)
Features:
- Double sealed ball bearings
- NEMA jet pump service factors
- NEMA 56C direct mounting
- Ball bearings
- UL recognized and CSA certified
Category Product
Part# Summary
Quick Reference -
201-201 (19) Oil Burner -- Three Phase -- Dripproof -- NEMA -- 56C -- (C-Face Footless) (8)
Category Product
Part# Summary
Quick Reference -
202-202 (19) Oil Burner -- Single Phase -- NEMA -- 48M and 48N -- Flange Mount (11)
Applications:
Domestic high and low pressure oil burners.
Features:
- Reversible rotation except as noted
- External reversing switch as noted
- Sleeve bearing except for OBK6002V1 and OL1072D
- 1.0 service factor except as noted
- Split phase designs except as noted
Category Product
Part# Summary
Quick Reference -
203-203 (19) Refrigeration Fan -- PSC -- Open Air Over -- Resilient Ring and Thru-Bolt Mount (8)
Features:
- Open end bracket
- Ball bearings
- Automatic reset thermal protector
- BX connector included in frame (except on catalog # X262)
- Catalog # X263 and X264 have 12” cord and molded plug
- UL recognized and CSA certified
- Capacitor included (except on catalog # X262 and X426)
Category Product
Part# Summary
Quick Reference -
203-203 (19) Refrigeration Fan -- Three Phase -- Open Air Over -- Shaft Up & HorIzontal Rigid Base Mount (7)
Category Product
Part# Summary
Quick Reference -
204-204 (19) Circulator Pump -- Split Phase -- Dripproof- Resilient Ring Mount (5)
Features:
- Ball bearing construction
- 1.40 service factor (except as noted)
- Fixed CCW rotation, viewed opposite shaft end, as noted
- UL recognized and CSA certified
- 4722 replaces 110-388, Marathon No. 48S17D1027 , 48S17D2102
- 4404 replaces Marathon No. 48S17D1084
Category Product
Part# Summary
Quick Reference -
204-204 (19) Transformer Cooling Fan Replacement -- TEAO -- Single Speed -- (Rigid Base) (4)
Features:
- External cooling air required
- Reversible rotation
- Ball bearings
- Optional extended clamp screws
- Z shaft is .50 x 2.25” with 1.91” Flat
Category Product
Part# Summary
Quick Reference -
204-204 (19) Unit Heater Fan -- PSC -- TEAO -- (Resilient Base) (9)
Applications:
Replacement motors for unit heaters. Air over motors need to be mounted within the airstream for proper cooling.
Features:
- Totally enclosed
- Direct drive, air over
- Ball bearings
- Horizontal or vertical mount
- Weather resistant reversing plug
- BX connector mounted in frame
- 1” extended thru-bolts
- Automatic reset thermal protection
- UL recognized and CSA certified
- Capacitor included
- 48Y frame has non-standard BA dimension
Category Product
Part# Summary
Quick Reference -
205-205 (19) ME-CAN-DO - Multi-Horsepower -- Condenser Fan -- PSC -- TEAO -- Thru-Bolt (3)
Applications:
Direct drive fans for shaft up or horizontal mount. These motors need to bemounted within the airflow of the fan for proper cooling.
Features:
- Ball bearings
- 60°C ambient
- Automatic reset thermal protector
- Weather resistant reversing plug
- Reversible by reconnection
- 36” long leads
- Extended thru-bolts, 8-32 1/2” on drive end, 3/4” on non-drive end
- Shaft slinger
- Four locating screws on frame, 90 O apart
- 1/2” x 5” long shaft with two flats 4.50” 90 O apart
- UL recognized and CSA certified
- Capacitor not included, see accessories section
Category Product
Part# Summary
Quick Reference -
206-206 (19) ME-CAN-DO - Multi-Horsepower -- Fan and Blower -- Direct Drive -- PSC -- Open Air Over -- Resilient Ring -- Thru-Bolt (9)
Applications:
Residential and commercial furnaces, air conditioners, exhaust fans, and other air handling equipment installed in clean and dry environments.
Features:
- Open end brackets
- 2 1/4” resilient rings
- 1/2” x 5” long shaft with two flats 4.50” 90 O apart
- Automatic reset thermal protector
- Weather resistant reversing plug
- Reversible by reconnection
- 36” long leads
- Extended thru-bolts, 8-32 1/2” on drive end, 3/4” on non-drive end
- UL recognized and CSA certified
- Capacitor not included, see accessories section
- Ball bearings
Category Product
Part# Summary
Quick Reference