Product Excerpt

Power:

2 HP
RPM3600
Voltage:575
Enclosure:TOTALLYENC
Frame:145T
CT:1000:1
List:1084
Our Price:705
Mult Code:E9
Eff.:86.5
Fla:2.1
Wt:68
C Dim:11.43
C-face Kit:A262
Ft Note(75) C-Face addition may result in non-NEMA ?BA?, dim. For new ?BA? dim consult chart found in modification section
Ft Note(76) C-Face addition results in non-NEMA ?AH? dim (+1.2? than NEMA).
Ft Note(N) Totally enclosed, non-ventilated

W512

$705.00

145THTN19002



Three Phase
Totally Enclosed
Blue Chip Severe/ Automotive Duty
NEMA Premium Efficiency XRI IEEE-841
Rigid Base
1-350hp

Applications:

  • For extreme applications in the process industries such as chemical plants, pulp and paper mills, refineries, above-ground mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are required.

Features:

  • Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run time applications.
  • Meets or exceeds NEMA Premium efficiencies, except where noted
  • NEMA Premium models are in compliance with EISA2007
  • Meets IEEE-841 standard for severe duty applications
  • Blue Chip quality, 100% cast iron construction for rigidity and reduced vibration
  • Inpro/Seal
  • VBX bearing isolators on drive end shaft extension TENV and on both ends of TEFC
  • Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
  • Internal and external epoxy paint
  • MAX GUARDclass F insulation system
  • Constant Torque speed range is listed in CT SPEED RANGE column
  • 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
  • Bearing caps (254T and larger)
  • Precision balanced to .08 /sec
  • Extended grease tubes, regreasable in service
  • Brass drain and breather
  • Meets General Motors GM 7E-TA Automotive Duty Specification
  • Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56
  • Meets NEMA MG1 – 1.26.6 Waterproof specification
  • Hazardous Duty Division 2 CSA certification nameplate Division 2 / Zone 2class I (gases), Groups A, B, C, D
  • Meets temperature code T2B
  • Actual test and vibration data supplied with each motor
  • Ball bearings (except as noted)
  • UL Recognized (through 449T) and CSA Certified and CE Marked
  • Five year warranty Suitable for use on VFD per guidelines on page 17.
  • Models through 40 HP are capable of modification as follows (contact factory to confirm):
  • 1.25 Service Factor (sinewave only)
  • 50Hz at same HP, 1.0 Service Factor (sinewave only)
  • Any nameplate changes are subject to modification charges (see MOD Central section)
  • Contact Marathon Electric for optional nameplate markings on 50 HP and larger







Description

Power: ; 2 HP ; kW ; , ; High HP ; , ; Low HP ; , ; RPM ; 3600 ; Voltage: ; 575 ; Voltage 2: ; , ; 4 IN1 ; , ; Enclosure: ; TOTALLYENC ; Frame: ; 145T ; ip55: ; , ; Div 1: ; , ; Div 2: ; , ; Grp C: ; , ; Grp D: ; , ; Grp E: ; , ; GrpF&G: ; , ; Overload: ; , ; CT: ; 1000:1 ; List: ; 1084 ; Our Price: ; 705 ; Mult Code: ; E9 ; SF.: ; , ; Eff.: ; 86.5 ; Fla: ; 2.1 ; Ins Class: ; , ; PPR: ; , ; PWM HP ; , ; Wt: ; 68 ; C Dim: ; 11.43 ; C-face Kit: ; A262 ; Torque Rating: ; , ; Brake Rating: ; , ; Base Details: ; , ; Base Type: ; , ; Base Dia.: ; , ; Down Thrust: ; , ; Frame Length: ; , ; Shaft Dim: ; , ; Approx. R: ; , ; Min: ; , ; Ft Note ; (75) C-Face addition may result in non-NEMA ?BA?, dim. For new ?BA? dim consult chart found in modification section ; Ft Note ; (76) C-Face addition results in non-NEMA ?AH? dim (+1.2? than NEMA). ; Ft Note ; (N) Totally enclosed, non-ventilated ;

Additional information

Dimensions 3 × 1 × 1 in