136-169 (19) Three & Single Phase Pump Motors
Pump Motors (Fluid Handling)


Subcategory List
-
136-136 (19) Carbonator Pump -- Split Phase -- Open Dripproof -- Motors (20)
Split Phase
Dripproof
Carbonator PumpFeatures:
- Ball bearings
- 1.0 Service Factor (except as noted)
- Completely interchangeable with OEM units
- Automatic reset thermal protector
- UL Recognized and CSA Certified
- Availible in Single Shaft & Double Shaft Versions
Category Product
Part# Summary
Quick Reference136-136 (19) Sump Pump -- Split Phase-- Dripproof Motors (3)
Features:
- Sleeve bearings
- 1.0 service factor
- Float switch & cord set
- Completely interchangeable with OEM units
- Automatic reset thermal protector
- UL recognized and CSA certified
Category Product
Part# Summary
Quick Reference137-137 (19) Jet Pump -- Two-Compartment -- Single Phase -- Dripproof -- ( Square-Flange) (6)
Features:
- Two-compartment design for easy servicing
- Not for use in pool pump applications
- 50° C ambient, as noted
- Fixed CW rotation, viewed opposite shaft end
- UL recognized and CSA certified
Category Product
Part# Summary
Quick Reference137-137 (19) Jet Pump -- Two-Compartment -- Single Phase -- Dripproof -- (C-Face Footless) 56C/56J (14)
Single Phase
Dripproof
Jet Pump
Two-CompartmentFeatures:
- Two-compartment design for easy servicing
- Not for use in pool pump applications
- 50° C Ambient
- Fixed CW rotation, viewed opposite shaft end
- UL Recognized and CSA Certified
- C-Face Footless, 56C/56J
- Square Flange
Category Product
Part# Summary
Quick Reference -
137-137 (19) Jet Pump -- Two-Compartment -- Single Phase -- Dripproof -- (Rigid Base) 56J (6)
Features:
- Two-compartment design for easy servicing
- Not for use in pool pump applications
- 50° C ambient, as noted
- Fixed CW rotation, viewed opposite shaft end
- UL recognized and CSA certified
Category Product
Part# Summary
Quick Reference -
138-138 (19) Jet Pump -- Single Phase -- Dripproof -- ( Square-Flange) (6)
Features:
- Two-compartment design for easy servicing
- Not for use in pool pump applications
- 50° C ambient, as noted
- Fixed CW rotation, viewed opposite shaft end
- UL recognized and CSA certified
Category Product
Part# Summary
Quick Reference -
138-138 (19) Jet Pump -- Single Phase -- Dripproof -- (C-Face Footless) 56C/56J (18)
Features:
- Capacitor start designs except as noted
- Internally mounted capacitor
- 50° C ambient, as noted
- Sealed switch design
- Ball bearings
- 56C (keyed shaft) and 56J (threaded shaft)
- Rotation CCW pump end (except for K1032, K1052, K1072, K1102, K1152, K1202 are reversible)
Category Product
Part# Summary
Quick Reference -
139-139 (19 ) Centrifugal -- (Jet Pump) -- Single Phase-- Dripproof -- (C-Face Footed- Rigid Base) -- 56J (12)
Single Phase
Dripproof
Jet Pump
Two-CompartmentFeatures:
- Service Factor, as noted
- Double sealed ball bearings, mechanically locked on shaft end
- Capacitor start/capacitor run design for higher efficiency, as noted
- Fixed CW rotation, viewed opposite shaft end
- Automatic reset thermal protector
- 56C = carbon steel shaft with key
- 56J = 416 stainless steel threaded shaft with slinger
- Drip cover not included, see Accessories Section
- UL Recognized and CSA Certified
Category Product
Part# Summary
Quick Reference -
139-139 (19 ) Centrifugal -- (Jet Pump) -- Single Phase-- Dripproof -- (C-Face Footless) 56C 56J (24)
Single Phase
Dripproof
Jet Pump
Two-CompartmentFeatures:
- Service Factor, as noted
- Double sealed ball bearings, mechanically locked on shaft end
- Capacitor start/capacitor run design for higher efficiency, as noted
- Fixed CW rotation, viewed opposite shaft end
- Automatic reset thermal protector
- 56C = carbon steel shaft with key
- 56J = 416 stainless steel threaded shaft with slinger
- Drip cover not included, see Accessories Section
- UL Recognized and CSA Certified
Category Product
Part# Summary
Quick Reference -
140-140 (19) Centrifugal -- (Jet Pump) -- Three Phase -- Dripproof -- (C-Face Footed Rigid Base) 56J (7)
Features:
- Service Factor, as noted
- Double sealed ball bearings, mechanically locked on shaft end
- Continuous Duty
- Nameplated 60/50 hertz, 190/380 volts at next lower HP, as noted
- 56C = carbon steel shaft with key
- 56J = 416 stainless steel threaded shaft with slinger
- UL Recognized and CSA Certified
- Drip cover not included, see Accessories section
Category Product
Part# Summary
Quick Reference -
140-140 (19) Centrifugal -- (Jet Pump) -- Three Phase -- Dripproof -- (C-Face Footless) 56C 56J (20)
Features:
- Service factor, as noted
- Double sealed ball bearings, mechanically locked on shaft end
- Continuous duty
- Nameplated 60/50 hertz, 190/380 volts at next lower HP , as noted
- 56C = carbon steel shaft with key
- 56J = 416 stainless steel threaded shaft with slinger
- UL recognized, CSA certified, and CE mark
- Drip cover not included, see accessories section
Category Product
Part# Summary
Quick Reference -
141-141 (19) Centrifugal -- (Jet Pump) -- Three Phase -- Totally Enclosed -- (C-Face Footless) -- 56C 56J (21)
Features:
- Service Factor, as noted
- Double sealed ball bearings, mechanically locked on shaft end
- Continuous Duty
- Nameplated 60/50 hertz, 190/380 volts at next lower HP, as noted
- 56C = carbon steel shaft with key
- 56J = 416 stainless steel threaded shaft with slinger
- UL Recognized, CSA Certified, and CE Mark
- Drip cover not included, see Accessories Section
Category Product
Part# Summary
Quick Reference -
141-141 (19) Centrifugal -- (Jet Pump) -- Three Phase -- Totally Enclosed -- C-Face Footed (Removable Base) 56J (11)
Features:
- Service Factor, as noted
- Double sealed ball bearings, mechanically locked on shaft end
- Continuous Duty
- Nameplated 60/50 hertz, 190/380 volts at next lower HP, as noted
- 56C = carbon steel shaft with key
- 56J = 416 stainless steel threaded shaft with slinger
- UL Recognized, CSA Certified, and CE Mark
- Drip cover not included, see Accessories Section
Category Product
Part# Summary
Quick Reference -
142-142 (19) Commercial Pump Motors -- Three Phase -- Squirrel Cage -- C-Face Footless -- Dripproof (9)
Applications:
Domestic, commercial amd industrial water systems.
Features:
- Mechanically locked bearing on shaft end
- 56C = keyed shaft
- 56J = 303 stainless steel threaded shaft
- Service factor, as noted
- Double sealed ball bearings
- H707ES vertical mount
Category Product
Part# Summary
Quick Reference -
142-142 (19) Commercial Pump Motors -- Three Phase -- Squirrel Cage -- C-Face Footless -- TEFC (7)
Applications:
Domestic, commercial amd industrial water systems.
Features:
- Mechanically locked bearing on shaft end
- 56C = keyed shaft
- 56J = 303 stainless steel threaded shaft
- Service factor, as noted
- Double sealed ball bearings
- H707ES vertical mount
Category Product
Part# Summary
Quick Reference -
143-143 (19) Special Direct Replacement Pump Motors -- Capacitor Start -- Dripproof -- Round Flange -- Extended Shaft (4)
Important:
Total horsepower (HP x service factor) of replacement motor must equal or exceed motor being replaced.
Features:
- Auto protector
- Sealed switch design
- 56J = Internally mounted capacitor
- 303 stainless steel special threaded shafts
- Service factor, as noted
- Ball bearings
- CCW-pump end rotation
- Cap. start / cap. run as noted
Category Product
Part# Summary
Quick Reference -
143-143 (19) Special Direct Replacement Pump Motors -- Capacitor Start -- Dripproof -- Square Flange -- Extended Shaft (3)
Important:
Total horsepower (HP x service factor) of replacement motor must equal or exceed motor being replaced.
Features:
- Auto protector
- Sealed switch design
- 56J = Internally mounted capacitor
- 303 stainless steel special threaded shafts
- Service factor, as noted
- Ball bearings
- CCW-pump end rotation
- Cap. start / cap. run as noted
Category Product
Part# Summary
Quick Reference -
144-144 (19) Close-Coupled Pump -- JM -- Single Phase -- Dripproof -- (C-Face Footed Rigid Base) (16)
Applications:
Close-coupled pumps where the pump impeller is mounted directly on the motor shaft in environments that are relatively clean and dry.
Features:
- NEMA® JM pump shaft dimensions
- Ball bearings, mechanically locked on shaft end
- Capacitor start design for high starting torque
- Capacitor start / capacitor run design for higher efficiency, as noted
- Continuous duty
- 1.15 service factor
- UL recognized and CSA certified
Category Product
Part# Summary
Quick Reference -
144-144 (19) Close-Coupled Pump -- JM -- Single Phase -- Totally Enclosed -- C-Face Footed (Rigid Base) (4)
Applications:
Close-coupled pumps where the pump impeller is mounted directly on the motor shaft in damp, dusty, or dirty environments.
Features:
- NEMA® JM pump shaft dimensions
- Ball bearings, mechanically locked on shaft end
- Capacitor start / capacitor run design for higher efficiency, as noted
- Continuous duty
- 1.0 service factor
- UL recognized and CSA certified
Category Product
Part# Summary
Quick Reference -
145-145 (19) Close-Coupled Pump -- JP -- Single Phase -- Dripproof -- (C-Face Footed Rigid Base) (12)
Features:
- NEMA ® JP pump shaft dimensions
- Ball bearings, mechanically locked on shaft end
- Capacitor start design for high starting torque
- Capacitor start / capacitor run design for higher efficiency, as noted
- Continuous duty
- 1.15 service factor
- UL recognized and CSA certified
Category Product
Part# Summary
Quick Reference -
146-149 (19) Close Coupled Pump -- JM -- Three Phase -- Dripproof -- (C-Face Footless -Vertical) & (C-Face Footed Rigid Base)(current offering) (202)
Features:
- Meets or exceeds all USA mandated efficiencies
- Suitable for use on a VFD. 10:1 variable torque and 2:1 constant torque
- 1.15 service factor on sinewave, 1.0 service factor on IGBT power
- NEMA® JM pump shaft dimensions
- JMV frame (includes drip cover as noted) for vertical mount without base
- JM frame has rigid base, drip cover not included
- Ball bearings, mechanically locked on shaft end
- Class F Insulation (except as noted)
- Dual rated motors are nameplated 60/50 hertz, 190/380 volts at next lower HP
- Standard assembly F1, reversible to F2 assembly (except as noted)
- UL recognized, CSA certified and CE mark
Category Product
Part# Summary
Quick Reference -
146-149 (19) Close Coupled Pump -- JM -- Three Phase -- Dripproof -- (C-Face Footless -Vertical) & (C-Face Footed Rigid Base)(Superceded) (161)
Features:
- NEMA JM pump shaft dimensions
- JMV frame includes drip cover for vertical mount without base
- JM frame has rigid base, drip cover not included
- Ball bearings, mechanically locked on shaft end
- Continuous duty
- 1.15 Service Factor
- UL Recognized and CSA Certified
- UL Listed for Fire Pump applications (except as noted)
Category Product
Part# Summary
Quick Reference -
150-153 (19) Close Coupled Pump -- JM -- Three Phase -- TEFC -- (C-Face Footless Vertical) and (C-Face Footed Rigid Base)(current) (174)
Features:
- Meets or exceeds all USA mandated efficiencies
- Suitable for use on a VFD. 10:1 variable torque and 2:1 constant torque
- 1.15 service factor on sinewave, 1.0 service factor on IGBT power
- NEMA® JM pump shaft dimensions
- JMV frame (includes drip cover as noted) for vertical mount without base
- JM frame has rigid base, drip cover not included
- Ball bearings, mechanically locked on shaft end
- Class F Insulation (except as noted)
- Dual rated motors are nameplated 60/50 hertz, 190/380 volts at next lower HP
- Standard assembly F1, reversible to F2 assembly (except as noted)
- UL recognized, CSA certified and CE mark
Category Product
Part# Summary
Quick Reference -
150-153 (19) Close Coupled Pump -- JM -- Three Phase -- TEFC -- (C-Face Footless Vertical) and (C-Face Footed Rigid Base)(Superceded) (80)
Features:
- Meets or exceeds all USA mandated efficiencies
- Suitable for use on a VFD. 10:1 variable torque and 2:1 constant torque
- 1.15 service factor on sinewave, 1.0 service factor on IGBT power
- NEMA® JM pump shaft dimensions
- JMV frame (includes drip cover as noted) for vertical mount without base
- JM frame has rigid base, drip cover not included
- Ball bearings, mechanically locked on shaft end
- Class F Insulation (except as noted)
- Dual rated motors are nameplated 60/50 hertz, 190/380 volts at next lower HP
- Standard assembly F1, reversible to F2 assembly (except as noted)
- UL recognized, CSA certified and CE mark
Category Product
Part# Summary
Quick Reference -
154-157 (19) Close-Coupled Pump -- JP -- Three Phase -- Dripproof -- (C-Face Footless Vertical) and (C-Face Footed Rigid Base) (365)
Features:
- Meets or exceeds all USA mandated efficiencies
- Suitable for use on a VFD. 10:1 variable torque and 2:1 constant torque
- 1.15 service factor on sinewave, 1.0 service factor on IGBT power
- NEMA ® JP pump shaft dimensions
- JMV frame (includes drip cover as noted) for vertical mount without base
- JM frame has rigid base, drip cover not included
- Ball bearings, mechanically locked on shaft end
- Class F Insulation (except as noted)
- Dual rated motors are nameplated 60/50 hertz, 190/380 volts at next lower HP
- Standard assembly F1, reversible to F2 assembly (except as noted)
- UL recognized, CSA certified and CE mark
Category Product
Part# Summary
Quick Reference -
158-160 (19) Close-Coupled Pump -- JP -- Three Phase -- TEFC -- (C-Face Footless Vertical) and (C-Face Footed Rigid Base)(current) (159)
Features:
- Meets or exceeds all USA mandated efficiencies
- IP55 rating, enclosure protection against dust and water jets, as noted
- Hazardous Duty ® motor Division 2 UL certification nameplate, as noted
- Division 2 / zone 2 class 1 (gases), groups A, B, C, D
- NEMA ® JP pump shaft dimensions
- JPV frame (includes drip cover as noted) for vertical mount without base
- JP frame has rigid base, drip cover not included
- Suitable for use on a VFD. 10:1 variable torque and 2:1 constant torque
- 1.15 service factor on sinewave, 1.0 service factor on IGBT power (except as noted)
- Dual rated motors are nameplated 60/50 hertz, 190/380 volts at next lower HP
- Class F Insulation
- Ball bearings, mechanically locked on shaft end
- Standard assembly F1, reversible to F2 assembly (except as noted)
- UL recognized, CSA certified and CE mark
Category Product
Part# Summary
Quick Reference -
158-160 (19) Close-Coupled Pump -- JP -- Three Phase -- TEFC -- (C-Face Footless Vertical) and (C-Face Footed Rigid Base)(Superceded) (9)
Features:
- Meets or exceeds all USA mandated efficiencies
- IP55 rating, enclosure protection against dust and water jets, as noted
- Hazardous Duty ® motor Division 2 UL certification nameplate, as noted
- Division 2 / zone 2 class 1 (gases), groups A, B, C, D
- NEMA ® JP pump shaft dimensions
- JPV frame (includes drip cover as noted) for vertical mount without base
- JP frame has rigid base, drip cover not included
- Suitable for use on a VFD. 10:1 variable torque and 2:1 constant torque
- 1.15 service factor on sinewave, 1.0 service factor on IGBT power (except as noted)
- Dual rated motors are nameplated 60/50 hertz, 190/380 volts at next lower HP
- Class F Insulation
- Ball bearings, mechanically locked on shaft end
- Standard assembly F1, reversible to F2 assembly (except as noted)
- UL recognized, CSA certified and CE mark
Category Product
Part# Summary
Quick Reference -
161-163 (19) Fire Pump -- Three Phase -- ODP -- EPACT Motors -- (Rigid Base) -- (Current) (111)
FIRE PUMP,
THREE PHASE,
ODP ,
RIGID BASE,
EPACT MOTORSApplications:
For use on pumps designed for fire pump duty and installed per NFPA-20.
These dripproof motors are intended for installation in relatively clean and dry environments.
Fire Pump motors are not recommended for use with variable frequency drives.
Features:
- UL file EX5190, CSA file LR2025 and CE mark
- 50° C ambient
- Ball bearings
- 1.15 service factor (except as noted)
- Red paint on 25 HP through 250 HP
- NEMA ® design B, code G or less
- Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
- Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
- Will accept C-Face kits (except as noted), see accessories section for kits
- 230/460 and 460 Volt models rated for 50 HZ at next lower HP
- 1.15 SF , as noted
Category Product
Part# Summary
Quick Reference -
161-163 (19) Fire Pump -- Three Phase -- ODP -- EPACT Motors -- (Rigid Base) -- (Superceded) (22)
FIRE PUMP,
THREE PHASE,
ODP ,
RIGID BASE,
EPACT MOTORSApplications:
For use on pumps designed for fire pump duty and installed per NFPA-20.
These dripproof motors are intended for installation in relatively clean and dry environments.
Fire Pump motors are not recommended for use with variable frequency drives.
Features:
- UL file EX5190, CSA file LR2025 and CE mark
- 50° C ambient
- Ball bearings
- 1.15 service factor (except as noted)
- Red paint on 25 HP through 250 HP
- NEMA ® design B, code G or less
- Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
- Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
- Will accept C-Face kits (except as noted), see accessories section for kits
- 230/460 and 460 Volt models rated for 50 HZ at next lower HP
- 1.15 SF , as noted
Category Product
Part# Summary
Quick Reference -
164-165 (19) Fire Pump -- Three Phase -- TEFC -- EPACT Motors -- (Rigid Base) (47)
Applications:
For use on pumps designed for fire pump duty and installed per NFPA-20.
Fire Pump motors are not recommended for use with variable frequency drives.
Features:
- UL file EX5190, CSA file LR2025 and CE mark
- Ball bearings
- 1.15 service factor
- Red paint exterior
- NEMA ® Design B, Code G or less
- Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
- Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
- Will accept C- Face kits, see accessories section
- 230/460 and 460 volt models rated for 50 HZ at next lower HP , 1.15 SF
- For special designs, contact district sales office near you
Category Product
Part# Summary
Quick Reference -
166-167 (19) Vertical Solid Shaft -- P-Base -- Three Phase -- Dripproof -- (current) (87)
Applications:
For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow, turbine, and propeller pumps.
HP type shafts, per NEMA ® MG-1 18.625. HPH and TCV type shafts, single phase, and other modifications such as adding screens are also available through special order.
Contact your sales representative for more information.
Features:
- Meets or exceeds NEMA Premium ® efficiencies
- Normal and medium thrust
- Rolled steel frames are normal thrust. Cast iron frames are medium thrust
- Ball bearings and angular contact bearings for medium thrust applications
- Class F insulation
- 1.15 service factor
- Suitable for 230 volt part winding start through 100 HP (dual voltage motors)
- Heavy duty lifting lugs
- Drip cover/canopy cap included
- UL recognized and CSA certified
- UL Listed for Fire Pump applications (except as noted)
Category Product
Part# Summary
Quick Reference -
166-167 (19) Vertical Solid Shaft -- P-Base -- Three Phase -- Dripproof -- (superceded) (119)
Applications:
For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow, turbine, and propeller pumps.
HP type shafts, per NEMA ® MG-1 18.625. HPH and TCV type shafts, single phase, and other modifications such as adding screens are also available through special order.
Contact your sales representative for more information.
Features:
- Meets or exceeds NEMA Premium ® efficiencies
- Normal and medium thrust
- Rolled steel frames are normal thrust. Cast iron frames are medium thrust
- Ball bearings and angular contact bearings for medium thrust applications
- Class F insulation
- 1.15 service factor
- Suitable for 230 volt part winding start through 100 HP (dual voltage motors)
- Heavy duty lifting lugs
- Drip cover/canopy cap included
- UL recognized and CSA certified
- UL Listed for Fire Pump applications (except as noted)
Category Product
Part# Summary
Quick Reference -
168-169 (19) Vertical Solid Shaft -- P-Base -- Three Phase -- Totally Enclosed (129)
Applications:
For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow, turbine, and propeller pumps.
Totally Enclosed, Fan Cooled construction restricts the free exchange of ambient air inside the motor.
Suitable for demanding applications in the process industries. HP type shafts, per NEMA ® MG-1, 18.625.
HPH type shafts, severe duty features, explosion proof, and other modifications such as adding screens are also available through special order.
Contact your sales representative for more information.
Features:
- Meets or exceeds NEMA Premium ® efficiencies
- Normal thrust
- Class F insulation
- 1.15 service factor
- Suitable for 230 volt part winding start through 100 HP (dual voltage motors)
- Heavy duty lifting lugs
- Drip cover/canopy cap included
- UL recognized and CSA certified
Category Product
Part# Summary
Quick Reference